KEYSCO TOOLS
DIVISION OF S&H INDUSTRIES, INC.
5200 Richmond Road
Cleveland, OH 44146
Phone 216-831-0550
Toll Free 800-253-9726
Fax 216-831-9573
www.shindustries.com
E-Mail: [email protected]
MADE IN THE USA
Rev. 1/19/12
FENDER STAND – 77780
The Keysco Tools Fender Stand will hold two fenders for doing all prep work, including painting,
grinding, sanding, etc. The Fender Stand is designed to fit all fenders, both foreign and domestic.
There are not tools required to hang a fender on the Keysco Tools Fender Stand – simply hang
fender on mounting pins (#11) and adjust T-bars (#8) until fender is secure.
DO NOT TIGHTEN HARDWARE UNTIL ALL PARTS ARE INSTALLED
Key #
Part # Description
Qty. Key #
Part # Description
Qty.
1
11378 Cap bracket
2
10
11373 Angle support
4
2
11370 45
Upright
2
11
11380 Mounting pins
4
3
11369 Straight upright
2
12
10201 1/4 Hex nut
8
4
11375 Extension tube
4
13
10675 1/4-20 x 2” Bolt
8
5
11372 Horizontal support
2
14
11381 Protective cap
16
6
11366 Floating slide bar
4
15
11379 Knob
16
7
11371 Straight bar
2
16
10178 1/4-20 Locknut
2
8
11374 T-bar
4
17
10676 1/4-20 x 1-1/2” Bolt
6
9
11368 Cross member
2
18
11498 Bumper extender tube
2
