background image

Error Messages

23

Treadmill Error Messages

.

Your treadmill is equipped with a software package that enables error messages to be dis-
played when there is a problem. The following error codes will be displayed in the console dis-
play windows.

Safety Interlock Error Messages

SI 1

 - Safety key missing, replace and try again.

SI 2

 - Over voltage protection trip. Notify Keys Fitness Customer Service.

Other Error Messages

E11 

-

 

Lack of speed feedback data from belt motor. Attempt calibration. See Calibration 

Sequence section on 

page 20

 of this Owners Manual for detailed information.

E22

 - Under Speed condition detected from the belt motor. Attempt calibration. See Calibration 

Sequence section for detailed information.

E33

 - Over Speed condition detected from the belt motor. Attempt calibration. See Calibration 

Sequence section for detailed information.

E44

 - Stuck key detected at power up, Notify Keys Fitness Customer Service.

To avoid possible damage to the treadmill and the possibility of injury, do not operate 
the treadmill until the problem is corrected. Call Keys Customer Service at 888-340-
0482.

Содержание TRI-ENDURANCE






























Отзывы: