Keys Fitness Keys 9000LI, Руководство пользователя

Страница: 16 / 33

16
HEART RATE MODE
The treadmill may be used at any time in the Heart Rate Mode. The Heart Rate program is designed to
keep your heart at a desired amount of “beats per minute” by automatically adjusting the incline. For
example, you have programmed in a desired heart rate of 125 BPM and your heart rate is only at 110
BPM. If you are wearing the Chest Strap Transmitter correctly, the incline will automatically increase to
intensify the work load, causing your heart rate to slowly climb to 125 BPM. It is suggested that the Chest
Strap Transmitter be positioned as close to your heart as possible, against the skin, 1-2 inches below the
pectoral muscles. The PULSE light on the console will blink when the Chest Strap signal is reaching the
console. The treadmill will attempt to maintain your target heart rate through adjustments to the incline for
the remainder of your workout. In the same respect, if your heart rate is above your programmed amount
of BPM’s, the incline will automatically decrease to lower your heart rate. See Figure 3, Figure 4, and sec-
tion entitled”Monitoring Your Heart Rate” for additional information on TARGET HEART RATES.
The Heart Rate Mode is safe and easy to understand. The user first sets the maximum Incline, Heart Rate
Target and Time. The workout is divided into three stages: Warm Up, Heart Rate Interactive and Cool
Down. In the Warm Up stage the treadmill is in MANUAL mode while the user adjusts Speed and Incline
while approaching Target Heart Rate. The Warm Up stage ends and the Heart Rate INTERACTIVE Mode
begins when the user’s Target Heart Rate is within 10 beats of the preset Target Heart Rate. The treadmill
will take over and adjust Incline in .5 increments up to the maximum Incline programmed to keep user’s
Heart Rate within 10 beats of preset target. In the COOL DOWN stage the treadmill is in MANUAL mode
while the user gradually decreases INCLINE and SPEED to slowly cool down.
HEART RATE PRESET PROGRAM OVERVIEW
There are a total of 14 different Heart Rate Programs. These are divided into three groups. The following
is a brief description of each of the three groups.
Time Based Target Heart Rate Programs- Programs are all Time based. There are five different programs
in this group. You may preset your Target Heart Rate and maximum Incline.
Distance Based Target Heart Rate Programs - Programs are all Distance based. There are 4 different pro-
grams in this group: 2 Mile, 4 Mile, 5K or 10K You may preset your Target Heart Rate and maximum
Incline. The Time of your workout will depend on your SPEED.
Interval Time Based Target Heart Rate Programs - These Programs allows you to program periods of rest
between periods of work. You must enter your Target Heart Rate, maximum Incline, duration of workout,
and duration of work and rest intervals.
HEART RATE PROGRAM OPERATION FOR TIME AND DISTANCE PROGRAMS
1. Plug treadmill into a surge protector outlet.
2. Press Power toggle switch on lower rear of unit..
3. Attach the Safety Key on to the treadmill console.
4. Attach the Heart Rate Monitor as previously instructed. If the display is receiving a signal from the chest
strap, the incline window will begin to display your current heart rate. If no signal is being received adjust
the Heart Rate Monitor location.
5. Stand on the treadmill and straddle belt. Attach safety key clip to your clothes.
6. The Information Window will scroll the following messages:
ADJUST WEIGHT
PRESS ENTER MODE
PRESS START
The weight that was entered last will show in Information Window. Use the SPEED + - buttons on the
console or the SPEED + - buttons on the handgrips to enter desired weight. Press ENTER MODE
7. Press the HEART RATE MODE button. Use Heart Rate Target UP and DOWN buttons to scroll to the
desired HEART RATE PROGRAM.
Heart Rate Mode