Assembly
8
Step 5:
Attach left inside handle cover and left outside
handle cover to left upright using philip screw
ST4.2x13 (Qty. 3) as shown in Figure 5.
Repeat assembly step for right side handle covers.
Figure 5
Figure 6
Step 6:
Tighten all allen bolts (Qty. 8) installed in Step
3.
Note:
Move the fenders up to access the allen
bolts.
Next, attach both left and right fenders to base
using philip screw ST4.2x13 (Qty. 2) and philip
screw M6x12 (Qty. 2).
Move the treadmill to its final location (see sec-
tion titled “Moving Instructions”). Adjust the
leveler feet so that treadmill does not wobble
while in use.
PHILLIP SCREW
PHILLIP SCREW
FENDER
LEVELER
FOOT
