Keys Fitness Alliance A4t, Руководство пользователя

Страница: 10 / 22

Program Operation
10
PROGRAM MODE
Plug treadmill into a surge protector outlet. Attach the Red Safety Key on to the treadmill console.

Stand on the treadmill and straddle belt. Attach safety key clip to your clothes.
 Press POWER button. There will be an eight (8) second delay before data can be entered. The TIME window
will flash.
 There are three (3) pre-set and six (6) semi-custom pre-set programs on the A4t treadmill . The treadmill
includes FAT BURN, CARDIO, and WARM-UP programs. To select the program press the corresponding
button on the console display

Press START/STOP button. Belt will begin to move after 4 seconds. Step on belt slowly after the belt starts
moving.

CUSTOMIZING PROGRAMS in P1 and P2 Mode: Each pre-set program (Fat Burn, Cardio, and Warm-
up) can be customized in the P1 or P2 mode. After making the program selection, the Center Brickyard win-
dow will read “OP”. The “OP” refers to “original program” and is preset. The program name you select will
illuminate on the console display. Press the PROGRAM DOWN button once more and the Center Brickyard
window will read P1. The “P1” mode is now accessed. Press ENTER PROGRAM. You can now program the
Time, Speed, and Incline in P1 mode, which will be saved for future workouts.
1) The TIME window will blink. Use the SPEED + or – arrows to select your workout time. Press ENTER
PROGRAM.
2) The SPEED window will then blink. Use the same + or – arrows to select the speed for your workout.
Press ENTER PROGRAM.
3) The INCLINE window will then blink. Use the I or – arrows to set your workout incline.
Press ENTER PROGRAM.
To start, press the START/STOP button. To access P2 mode, press the PROGRAM UP or DOWN button
for desired program, then press the PROGRAM UP or DOWN button (once for OP, twice for P1, three times
for P2). Follow the above steps 1-3 to customize P2 settings.

TO CHANGE A PREVIOUSLY PROGRAMMED P1, P2, or user program: Once you have pro-
grammed the P1 or P2 modes, you will need to use the PAUSE button to change the program you previously
entered. For instance to change to a new setting in P1-FAT BURN, press the PROGRAM UP or DOWN to
select the FAT BURN program. Next, press the same button once more to access P1. Then press the PAUSE
button to get the TIME window to flash. Follow the directions above to continue to change the program.
PAUSE
POWER
POWER
INCLINE
SPEED
START /
STOP