TA7004NT TimeAttendance Terminal User Manual V1.00
2
1.2
Feature
1.
It integrates the functions of password keyboard, reading head,
single door access control and Time attendance. It is a new
generation product that can meet the needs of many customers. Its
three flexible using are showed as follows:
Time Attendance: It can be connected to the DPU3000 series
controller directly through RS485 or TCP interface and connected to
the host computer at the same time, and managed by Sphinx4.4 access
control software;
Single-door control: On the basis of the Time attendance, the
TA7004NT can be used as a single-door access controller; and an
external card reader can be connected for access control.
Wiegand card reader with LCD: display of company name and clock;
Wiegand 26 or Wiegand 34 signal can be output; can be used with any
Wiegand format access controller.
2.
With one exit button, one door magnet, one Wiegand26/34 signal
input/output (IC, ID card can be read, IC card reads its serial
number), two auxiliary inputs, one set of relay output, one RS485
communication Interface, a doorbell switch interface;
3.
Can be connected to Wiegand26/34 card reader (including keyboard
type card reader), support card, password, card + password, super
password and other access modes;
4.
OLED screen ,content display customization; full Chinese menu
interface with backlight; can display the cardholder name and card
number.
5.
Can be networked (485 up to 127, unlimited in the TCP connection
state), can also be used offline. The device parameters can be set
via the keyboard when offline.
