TC3XYMT/TC3XYNT Starter Guide (Version 1.04.1)
Keyking International Limited
Suite 3, 12/B Wissotzky St., Tel Aviv, 62338, Israel
Tel: (972)-3-5464256 Fax: (972)-3-5464259 Website:
www.key-king.com
Page 5
8 CTS
9 RI
-
Plug DB9 connector to a free COM port on your PC
2.3.
Connect the TC3XYMT controller to PC through IC232 RS232-RS485
-
Print out TC3XYHardwareUserManualx.xx.doc (x.xx meaning version).
-
Please refer to the last page of the connection diagram (it is better to view it on the PC
display because of the color code).
-
Connect RS485+, RS485- of converter to RS485+, RS485- of controller follow the
diagram.
-
Connect IC232 to a free COM port of PC using RS232 cable.
-
Connect USB plug to your computer to get power if there is no USB port available
please use an external power supply (7-15VDC) for IC232 converter.
2.4.
Connect the TC3XYMT controller to PC through C2000 TCP-RS485
-
Connect the C2000 to HUB/Switch using a regular network cable.
-
Connect power supply (7-15VDC) to C2000.
-
Connect RS485+, RS485- of TC066 to RS485+, RS485- of controller.
-
Make sure your PC is connecting to network properly.
2.5.
Connect the TC3XYNT controller to HUB/Switch.
-
Print out TC3XYHardwareUserManualx.xx.doc (x.xx meaning version).
-
Please refer to the last page of the connection diagram (it is better to view it on the PC
display because of the color code).
-
Connect TC3XYNT to HUB/Switch by using “Straight Through” cable. If you want to
connect the controller to your PC directly, please use a “Crossover” cable.
-
Discussion
