KEYBOARDPARTNER HX3 MIDI Expander Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 26

KEYBOARDPARTNER HX3 MIDI Expander Скачать руководство пользователя страница 26

26 HX3 MIDI Expander

Using HX3 with HX3 DrawbarController

HX3 Drawbar Controller is specially designed to be used with HX3 MIDI Expander. It will merge
incoming MIDI data on MIDI MERGE input to its own controller data.

For use with HX3 MIDI Expander, you may utilize its

“phantom” power supply feature (power over

MIDI cable). Phantom supply is usually set by factory. If it is not, you may use a separate wall wart
for the HX3 Drawbar Controller or need to open the
device and set two jumpers to enable phantom supply on
the HX3 MIDI Expander.

To configure phantom supply insert two jumpers to
jumper header PL18 on positions 7-8 and 9-10 as shown
in picture. Connect 5-wire MIDI cable to HX3 MIDI
Expander MIDI IN/OUT and to HX3 Drawbar Controller
MIDI OUT.

Attention: Always connect wall wart to HX3 MIDI Expander. Never connect the wall wart to
Drawbar Controller when phantom power is enabled. Doing so may damage the devices.

.

Serial numbers and licenses

HX3 is protected against forgery by licence numbers. If not set appropriately after firmware
update, HX3 will refuse to work after 2 minutes. Licences may be re-installed by means of the
HX3.5 Editor at any time.

Please contact KeyboardPartner to obtain a valid licence key. We need your serial number (issued
on startup and by HX3.5 Editor application) to generate new licences for you.

Documents library, Download repository:

https://updates.keyboardpartner.de/

Join the

HX3 community

at http://forum.keyboardpartner.de

Entwicklung elektronischer Musikinstrumente

Carsten Meyer, Ithweg 37, D-30851 Langenhagen

Web: keyboardpartner.com

EMail:

[email protected]

All information given herein is given to describe certain components and shall not be considered
as a guarantee of characteristics. Rights to technical changes reserved.

«
...
24
25
26

Содержание HX3 MIDI Expander



























Отзывы:

Нет отзывов