521 East 3
rd
Street Mt. Vernon, NY 10553 • www.keydigital.com
Rev 1.1
– Jul, 2022
7
CAT6/A Output and Input
Connect Tx unit’s CAT6/A Output port to Rx unit’s CAT6/A Input port using CAT5e/6 UTP or STP in 568-B
termination.
•
4K/UHD (18G) Extension
o
with CAT5e/6: Up to 230ft / 70m
o
with CAT6A STP: Up to 328ft / 100m
•
1080p Extension
o
with CAT5e/6: Up to 230 ft / 70m
o
with CAT6A STP: Up to 328ft / 100m
•
Supports Dolby®, DTS (5.1 formats max)
•
Connect to KD-X444LP only. Damage will occur if connected to non-KD-X444LP products and warranty
will be void.
IR, RS-232 Ports and Selection Switch
Select RS-232 or IR control extension as desired. RS-232 and IR may not be extended simultaneously.
•
If IR is selected, both IR In and IR Out ports may be utilized simultaneously.
•
The Tx unit’s IR In
supports a hard-wired / Serial IR from a control system / IR block only. The incoming
IR signal is output on the Rx unit’s IR Out port.
o
Pinout of Tx unit IR In port: