2
Accessories
›
(1) 12V 2A DC Power Supply (Screw-In Type), model KD-PS12V2ASC, (2) Mounting Brackets,
(1) IR Emitter, (1) IR Sensor
›
KD-X222PO only requires power on the Tx unit, which extends power to the Rx unit
Quick Setup Guide
Step 1:
Find a safe and convenient location to mount or place your KD-X222PO units
Step 2:
Begin with the KD-X222PO Tx/Rx units and all input/output devices turned off with power
cables removed
Step 3:
Connect your HDMI source to the input port of your KD-X222PO Tx unit
Step 4:
Connect your HDMI displays to the output port of your KD-X222PO Rx unit
Step 5:
Connect KD-X222PO Rx unit to KD-X222PO Tx with CAT5e/6 cable using 568-B termination .
Step 6:
Connect additional IR/RS-232 control connections and IR sensors
Step 7:
Set the EDID rotary to position A for 4K resolution with 2ch audio . For 1080p with 2ch audio,
use position 7 . Refer to the SETTINGS section for more information
Step 8:
BEFORE connecting power supply to power outlet,
screw-in the power supply to the
KD-X222PO Tx unit
Step 9:
AFTER all connections are made, plug-in power supplies to power outlets
Step 10:
Power on input/output devices
Installation and Operation
Before permanently securing the unit for final installation, test for proper operation of the unit and cables
in your system . It is recommended that you leave enough ventilation space to provide sufficient airflow
and cooling .
You MUST use the Power Supply
PROVIDED
with your unit or you
VOID
the Key Digital
®
Warranty and risk damage to your unit and associated equipment.
