1
Key Features
›
HDBaseT via Single CAT5e/6 UTP/STP Extension:
With fully automatic adjustment of feedback,
equalization, and amplification depending on cabling length
›
Power over HDBaseT:
Tx unit powers Rx unit . Only one power connection needed .
›
Signal Extension:
»
Up to
150 ft. @ 4K
24/25/30(4:4:4)/60(4:2:0) using CAT6A cabling
»
Up to
125 ft. @ 4K
24/25/30(4:4:4)/60(4:2:0) using CAT5e/6 UTP/STP cabling
»
Up to
250 ft. @ 1080p
/ 1920x1200 using CAT6A cabling
»
Up to
230 ft. @ 1080p
/ 1920x1200 using third-party CAT5e/6 UTP/STP cabling
›
HDCP 2.2:
Compliancy up to HDCP 2 .2 and backward compliant
›
HDR (High Dynamic Range):
HDR is achieved with AppleTV source at 4K/30 [4:2:2] 12bit deep
color, enabling more life-like images through a greater range of luminance levels .
›
4K/Ultra HD Resolution:
Supports signals up to 4096x2160 60Hz [4:2:0] 8bit, 4096x2160 30Hz
[4:2:2] 12bit, and 4096x2160 30Hz [4:4:4] 8bit
›
Deep Color Support:
Up to UHD/4K 30Hz 4:2:2/12 bits or 60Hz 4:2:0/8 bit
›
Low Profile:
Super slim chassis design
›
HDMI
®
and HDCP Licensing:
Fully licensed and compatible with HDCP 2 .2 and HDMI latest
technology such as 4K/UHD 4:2:0/8bit at 60f/s
›
EDID Control:
Internal library features 15 default EDID configurations and native EDID data from
Output/Display devices connected via Rx
›
Hot Plug Detection Control:
Enables integrator to choose if active signal voltage is forced to
connected input devices
›
Full Buffer System
™
:
Manages TMDS re-clocking / signal re-generation, HDCP authentication
with source & display, EDID Control handshake, and Hot Plug control
›
IR Sensor:
Sensor powering via +5V on Rx unit’s IR In port collects line-of-sight IR from remote(s)
without external IR connecting block
›
Up/Down IR:
Two channels of IR enable control to/from devices connected to Tx and Rx units
›
RS-232:
Bi-Directional control to/from Tx and Rx unit on Phoenix connector
›
Rotary Switch RS-232 Control Mode:
Provides control of Tx unit as well as connectivity status
›
3D:
Support for standard 3D stereoscopic signal formats
›
Surround Sound Audio:
Supports Dolby
®
TrueHD, Dolby
®
Digital Plus, Dolby Atmos
®
, and DTS-HD
Master Audio
™
multi-channel audio formats
›
CEC Support:
For inter-device control between input and output HDMI channel
›
I2C Communication:
EDID and HDCP authentication to Display and Source
›
Control System Support:
Fully controllable by all RS-232 supported control systems via open API:
Compass Control
®
, AMX
®
, Crestron
®
, KNX
®
, RTI
®
, Savant, URC
®
, Leviton
®
etc .
