KD-MSV8X8 Operating Instructions
Page
KD-MSV8X8 Operating Instructions
Page
Introduction
About the KD-MSV8X8
The KD-MSV8X8 is a full matrix HDTV/SDTV video switcher capable of switching 8 inputs to 8
outputs. The idea behind a full matrix switcher is the fact that any input, or source, is available on
any output, or zone, at any time. Likewise, the switcher can also be used as a distribution amplifier
when all outputs are fed from the same source input.
The unit will handle component and composite signals, including S-Video with adapters. RGBHV
signals are also accommodated by using two inputs and two outputs for every source and zone
(see page 4). This yields the capability of switching 4 inputs to 4 outputs. The KD-MSV8X8 will
accept video signals at resolutions up to 1080i for component video and up to 1080P when used in
RGBHV mode. There is no ‘conversion’ process and whatever resolution or format is present upon
input is also available at the output.
Control of the KD-MSV8X8 is through front panel push buttons, IR remote, serial IR or RS-232.
Video Connections:
Input
Analog:
Component (8)
-or-
VGA/RGBHV* (4)
-or-
Composite (8)
S-Video (8)*
* RGBHV signals accommodated using two input ports and two output ports,
thereby creating a 4X4 RGBHV matrix switcher.
**S-Video signals accommodated with the use of S-Video to Composite video adapter cables.
Additional Key Features:
Front panel LED input/output assignment confirmation
Easily controlled via IR remote (included) with discrete codes, Serial IR, and RS-232
RCA style connectors for ease of installation
Slim 1U Rack chassis for space conservation
Accessories
External 6 Volt DC 6.6 Amp switching power supply (for 110V-240V 50/60Hz applications)
IR Remote control with two batteries
Operating Instructions
›
›
›
›
›
›
›
Output
Analog:
Component (8)
-or-
VGA/RGBHV* (4)
-or-
Composite (8)
S-Video (8)*
InSTALLATIOn AnD OPERATIOn
Mounting
Rack mount:
Secure the rack ears to each side of the KD-MSV8X8 with the supplied hardware.
Then, fasten the unit to the rack rails with the included machine screws.
Figure 2: Rack mounting the KD-MSV8X8
Rear Panel Connections
All connections to the KD-MSV8X8 are found on the rear panel of the unit. Refer to the drawing
below for port assignments while making connections.
2. Power Button
3. IR eye and
serial IR port
5. Power Connections
4. Programming Switch
6. RS-232 Connector
1. Video Inputs
Figure 3
KD-MSV8x8_Manual.indd 2-3
8/30/07 3:55:20 PM
