Key Digital KD-DA2x4G, Руководство по эксплуатации

Страница: 10 / 20

8
EDID Handshaking Control
Position EDID Handshake Description EDID Rotary
0
Copy EDID from HDMI Output
Note: Default position
is “
A
”
1 1080i, 2CH AUDIO
2 1080i, DOLBY/DTS 5 .1
3 1080i, HD AUDIO
4 1080p, 2CH AUDIO
5 1080p, DOLBY/DTS 5 .1
6 1080p, HD AUDIO
7
4Kx2K@60, 10 .2G, HDR, 2CH AUDIO
8
4Kx2K@60, 10 .2G, HDR, DOLBY/DTS 5 .1
9
4Kx2K@60, 10 .2G, HDR, HD AUDIO
A
4Kx2K@60, 18G, HDR, 2CH AUDIO
B
4Kx2K@60, 18G, HDR, DOLBY/DTS 5 .1
C
4Kx2K@60, 18G, HDR, HD AUDIO
IMPORTANT: Please
apply light pressure
to the EDID rotary
when making your
selection.
D
1280x720p@60 DVI (no audio)
E 1920x1080p@60 DVI (no audio)
F 4Kx2K@30, 10 .2G, HDR, 2CH AUDIO
EDID authentication is provided from
the KD-DA2x4G/KD-DA2x8G unit to
the connected input/source device .
›
The EDID file (AKA “handshake”)
is selected using the EDID rotary
on the unit and provides a list
of compatible video and audio
formats as well as digital data,
informing the source device
what it should output .
›
Most sources will comply with a
new EDID file without a power-
cycle, but each source may
behave differently .
›
Adjustments may be necessary
to help achieve desired video
and audio formatting and may
speed up sync time .
Auto Sensing Mode
›
May be set to Fixed On via serial command (TCP-IP / RS-232) or set to Soft On via IR remote
(auto sensing will turn off with any manual switching) .
›
Activated via Hot Plug Detection voltage
›
When on
a newly plugged in or powered on source will automatically be selected .
›
When on a newly disconnected or powered off source will advanced the unit to the next
available active input .