The KD-CDA12 can be configured in 3 separate
modes:
Mode1: 2 inputs each driving 6 outputs each ‡ 2X6
Mode (factory Default).
Mode2: 1 input driving 12 outputs with the unused
input driving the next amplifier ‡ NX12 mode.
Mode 3: 1 Input driving 12 outputs ‡ 1X12 mode.
Mode 1:
The KD-CDA12 has two sets of inputs! This
essentioally allows for independent connection of
two “Source” devices and usage of the KD-CDA12 as
two separate KD-DA6’s. Using this configuration it is
possible to distribute two discreet Audio/Video sig-
nals to two banks of 6 different “Display” devices
each (use the hookup described above for the KD-
DA6). The dipswitches on the unit should be set to
the following:
_1 2 3 4 _5 _6 7 8
SW1 ON OFF ON ON OFF OFF ON ON
_________________________________________________________________________________________
SW2 ON OFF ON ON ON OFF OFF ON
* Please refer to the illustration for 2X6 termination
mode. *
Mode 2:
The KD-CDA12 can also be cascaded or
“Daisy Chained”. Using hookup-method allows multi-
ple units to be connected in series. One of the two
Page 7
HD View12
OP E R AT ING IN S T R U C T ION S
Model KD-CDA12
