Page 1
Quick Setup Guide
Step 1:
Begin with all input/output devices turned off with power cables removed
Step 2:
Connect video source, CAT5/6/7 cabling, and Power into Active or Passive
Transmitter Baluns
Step 3:
Insert twisted pair wires into “UTP In” Phoenix Connector or “UTP In”
CAT5/6/7 RJ45 connector as instructed on chassis above RJ45 input.
See “Video Connections” section.
Step 4:
Connect video display and/or DVR to “Video Out” of KD-4AUVRX
Receiver Hub
Step 5:
and – power wires into Phoenix Connector “Power” inputs
Step 6:
Make appropriate settings to “Distance Adjustment” dip switches. See
“Distance Adjustment Table” section
Step 7:
Power on all input/output devices
CAT5/6/7
Video
4,000’
CAT5/6/7
Video
4,000’
CAT5/6/7
Video
CAT5/6/7
Video
CAT5/6/7
Video
CAT5/6/7
Video
Video
Video
Video
Video
Video
Video
Video
Video
Video
Video
Video
Video
CAT5/6/7
Video
Video
Video
Video
Video
Video
Video
Video
Monitor
DVR
Monitor
DVR
DVR
Monitor
Monitor
DVR
Monitor
DVR
Monitor
DVR
DVR
Monitor
Monitor
DVR
CAT5/6/7
KD-AUVTX
KD-4AUVRX
KD-AUVTX
KD-AUVTX
KD-AUVTX
KD-4AUVRX
KD-4PUV
Security Cam
Security Cam
Security Cam
Security Cam
Security Cam
Security Cam
Security Cam
Security Cam
KD-4AUVRX
Four Channel Active Video
Receiver