EN - 17
User Manual
5.1 ADJUSTING
REVERB
The reverb effect can be adjusted by modifying these two parameters:
-
TYPE
("
tyP
" on the display): select the reverb type.
-
PRE ROTARY (“
PrE
” on the display): position of the reverb effect in relation to the Rotary.
REVERB TYPE
1.
Press the [REVERB] button until the display shows the message “
tyP
”.
2.
Press [VALUE +] or [VALUE -] to select:
-
“
hAl
”: HALL reverb, simulating a real closed environment.
-
“
sPr
”: SPRING reverb, simulating the classic spring reverb.
REVERB PRE ROTARY
1.
Press the [REVERB] button until the display shows “
PrE
”.
2.
Press [VALUE +] or [VALUE -] to switch between:
-
“
oFF
”: the reverb is added after the Rotary effect.
-
“
on
”: the reverb is applied before the Rotary effect.
For more information on the Reverb effect, see par. 4.5.
5.2 ADJUSTING THE ROTARY
The Rotary effect can be adjusted by modifying the following parameters:
-
TYPE (“
tyP
” on the display): selection a Rotary speaker type.
-
DIRECT (“
drt
” on the display): deactivate the Rotary effect.
-
MEMPHIS STYLE (“
MPs
” on the display): activate the MEMPHYS STYLE mode.
ROTARY TYPE
1.
Press the [ROTARY] button until the display shows the message “
tyP
”.
2.
Press [VALUE +] or [VALUE -] to switch between:
-
“
Cls
”: CLASSIC mode, simulates the speaker as really perceived by the musician.
-
“
rCk
”: ROCK mode, simulates the sound of the Rotary when recorded with a microphone.
ROTARY DIRECT
1.
Press the [ROTARY] button until the display shows the message “
drt
”.
2.
Press [VALUE +] or [VALUE -] to switch between:
-
“
off
”: effect disabled.
-
“
on
”: effect enabled.
ROTARY MEMPHIS STYLE
It is called "Memphis style" the mode of using the rotating speakers unplugging the motors on the lower rotor,
so that only the upper rotor continues to spin. This mode allows you to have a solid bass sound and the treble
that continue to be modulated.
1.
Press the [ROTARY] button until the display shows the message “
MPs
”.
2.
Press [VALUE +] or [VALUE -] to switch between:
-
“
off
”: MEMPHIS STYLE mode disabled.
-
“
on
”: MEMPHIS STYLE mode enabled.
For more information on the Rotary effect, see par. 5.2.