EN - 2
User Manual
1. IMPORTANT NOTES
1.1 PRODUCT CARE
•
Do not apply excessive force to the instrument's structures and controls (knobs, buttons, keyboard etc...).
•
Whenever possible, do not place the instrument close to units that generate strong interference, such as
radio - TV sets, monitors, etc ...
•
Do not place the instrument close to heat sources, in damp or dusty places or in the vicinity of strong
magnetic fields.
•
Do not expose the instrument to direct sunlight.
•
Never insert foreign bodies or liquids of any kind into the instrument.
•
For cleaning use only a soft brush or compressed air; never use detergents, solvents or alcohol.
•
Always use good quality screened cables for connection to amplification or diffusion systems. When
disconnecting cables from sockets, always take hold of the connector and not the cable itself; when
winding cables do not knot or twist them.
•
Before making connections make sure that the other units you are about to connect (especially
amplification and diffusion systems) are switched off. This will prevent noisy or even dangerous signal
peaks.
•
Only use the external power adapter supplied with the instrument. Using an incorrect adapter may cause
damage.
•
Make sure that the mains voltage is exactly as printed on the instrument's power supply.
•
When the instrument is going to be unused for a long period, disconnect the power supply from the socket.
•
Keep the power supply away from sources of heat.
1.2 NOTES ABOUT THIS MANUAL
•
Keep this manual with care.
•
This manual is an integral part of the instrument. The descriptions and illustrations contained in this
publication are not binding.
•
While the instrument’s essential characteristics remain the same, the manufacturer reserves the right to
make any modifications to parts, details or accessories considered appropriate to improve the product or
for requirements of a constructional or commercial nature, at any time and without undertaking to update
this publication immediately.
•
All rights reserved; the reproduction of any part of this manual, in any form, without the manufacturer’s
specific written permission, is forbidden.
•
All the trademarks referred to in this manual are the property of the respective manufacturers.
•
Please read all the information carefully, so that you obtain the best performance and will from your
instrument.
•
The codes or numbers in square brackets ([ ]) indicate the names of the buttons, sliders, trimmers and
connectors on the instrument. For example, [UPPER] refers to the UPPER button.
•
Le illustrazioni sono puramente a scopo informativo e possono differire dal vostro prodotto.
•
The illustrations are purely for information purposes and may differ from your product.
•
The instructions provided in this manual only concern the instrument's operating system version that was
up to date when the document was released. Therefore, such instructions might not describe faithfully your
current operating system release.
Please, visit the website www.viscountinstruments.com to check for the newest operating system release
and manual.
This user manual is updated to version 1.6 of the instrument's operating system.
