Kettler Quadriga Duo Speed 45, Инструкция по эксплуатации и техническому обслуживанию

Страница: 86 / 128

MY20K10 - 12_1.0_11.01.2021
86
Cleaning and servicing
7.3 Servicing
7.3.1 Servicing the frame

Dry the frame.
 Spray with care oil.

Clean off the care oil again after a short time.
7.3.2 Servicing the stem
 Apply silicone or Teflon oil to the stem shaft
tube and the quick release lever pivot point.
 If you have speedlifter Twist, also apply oil to
the unlocking bolt using the groove in the
speedlifter body.
 Apply a little acid-free lubricant grease
between the stem quick release lever and the
sliding piece to reduce the quick release lever
operating force.
7.3.3 Maintaining the suspension fork
 Treat the dust seals with fork oil.
7.3.4 Servicing the drive elements
 Treat front and rear derailleur articulated
shafts and jockey wheels with Teflon spray.
7.3.5 Servicing the pedals
 Treat pedals with spray oil.
7.3.6 Servicing the chain
 Lubricate the chain thoroughly with chain oil.
7.4 Maintenance
The following maintenance measures must be
performed on a regular basis.
7.4.1 Wheel
1 Check the tyres for wear.
2 Check the tyre pressure .
3 Check the rims for wear.
 The rims of a rim brake with invisible wear
indicator are worn as soon as the wear
indicator becomes visible in the area of the rim
joint.
 The rims with visible wear indicator are worn as
soon as the black, all-round groove on the pad
friction surface is no longer visible. We
recommend that you also replace the
rims with
every second brake lining replacement.
4 Check the tension of the spokes.
7.4.1.1 Checking the tyres
 Check the tyre wear. The tyre is worn if the
anti-puncture protection or the carcass cords
are visible.
 A specialist dealer will need to change the tyre
if it is worn.
7.4.1.2 Checking the rims
 Check the rims for wear. The rims are worn as
soon as the black, all-round groove on the pad
friction surface becomes invisible.
 Contact your specialist dealer to have the rims
replaced. We recommend that you also replace
the
rims at the same time as every second
brake lining replacement.
Required tools and cleaning agents:
• Cloths
• Toothbrushes
• Dish-washing liquid
• Care oil for frames
• Silicone or Teflon oil
• Acid-free lubricating grease
• Fork oil
• Chain oil
• Degreaser
• Spray oil
• Teflon spray
Crash caused by braking hard on rims
A rim can break and block the wheel if you brake
hard. This may cause a crash with serious
injuries.
 Check rim wear on a regular basis.
WARNING
!