Kettler KB142-ZXRW, Перевод оригинальной инструкции по эксплуатации

Страница: 83 / 154

MY21K01 - 32_1.0_24.09.2020
83
Operation
6.14 Using the push assist system
The push assist helps the rider to push the
pedelec. The speed can be a maximum of 6 km/h
in this case.
The push assist cannot be activated at the OFF
assistance level.

The tractive power of the push assist and its
speed can be influenced by the selection of gear.
To spare the drive, first gear is recommended for
travelling uphill.

The level of assistance OFF must not be
selected.
1 Press the push assist button briefly (< 1 s) to
activate the push assist.
2 Press and hold down the plus button within
3 seconds to switch on push assist.
3 Release the plus button to switch off push
assist.

The push assist system switches off
automatically as soon as the pedelec wheels
are blocked or the speed exceeds 6 km.
6.14.1 Using the riding light

The drive system needs to be already switched
on to turn on the
riding light .
 Push the plus button momentarily (1 to 2.5 s).
 The riding light is switched on. The riding light
symbol is displayed.
 Push the plus button for a long time (> 2.5 s).
 The riding light is switched off. The riding light
symbol is not displayed.
6.14.2 Selecting the level of assistance
 Press the plus button briefly (< 1 s) to increase
the level of assistance.

Press the minus button briefly (< 1 s) to reduce
the level of assistance.
6.14.3 Journey information
The displayed journey information can be
changed and partially reset.
6.14.3.1 Switching the journey information

Push the minus button momentarily (1 to
2.5 s).
 The journey information trip distance (TRIP),
total distance travelled (TOTAL), range
(RANGE), and support modes used are shown
on the display screen.
6.14.3.2 Resetting the trip distance
1 Select the item of journey information TRIP.
2 Push both the plus button and the minus
button at the same time for a long time
(> 2.5 s).
 RESET is shown on the display screen.
3 If you continue to jiggle the plus and minus
buttons at the same time, the trip distance will
be reset to 0.
Injury from pedals or wheels
The pedals and the drive wheel turn when the
push assist system is used. There is a risk of
injury if the pedelec wheels are not in contact with
the ground when the push assist system is used
(e.g. when carrying the pedelec up stairs or when
placing it on a bicycle rack).

Only use the push assist mode when pushing
the pedelec.
 You must steer the pedelec securely with both
hands when using push assist.

Allow for enough freedom of movement for the
pedals.
CAUTION
!