Kettler KB142-ZXRW, Перевод оригинальной инструкции по эксплуатации

Страница: 34 / 154

MY21K01 - 32_1.0_23.09.2020
34
Overview
3.5 Description of controls and
screens
3.5.1 Handlebars
Figure 28: Detailed view of pedelec from rider position,
example
1 Rear brake lever
2 Bell
3 Headlight
4 Front brake lever
5 Display
6 Suspension fork compression adjuster
7 Shifter
3.5.2 Battery level indicator
Each battery has its own level indicator:
Figure 29: Example of a battery level indicator
1 On-Off button (battery)
2 Battery level indicator
The five green LEDs on the battery level indicator
show the charge level when the battery is
switched on. Each LED represents about 20 % of
battery capacity. All five LEDs will light up when
the battery is fully charged. The charge level for
the activated battery is also shown on the
display
screen .
If the battery level falls below 5 %, all the LEDs on
the operating status and battery level indicator will
go out. However, the battery level is still shown on
the
display screen .
3.5.3 Display
The display has nine on-screen indicators:
Figure 30: On-screen indicators overview
1 Indicator – unit km/h or mph
2 Tachometer indicator
3 TRIP indicator
4 Level of assistance indicator or Function
indicator
5 Lighting indicator
6 Service indicator
7 Battery level indicator
8 RANGE indicator
9 TOTAL indicator
3.5.3.1 Indicator unit km/h or mph
The speed can be displayed in km/h or mph. You
can choose between the units in the system
settings.
3.5.3.2 Tachometer screen
The tachometer indicator shows the current
speed at all times.
3.5.3.3 Information display
The display shows one of three types of
information. The displayed information can be
changed.
1
2
3
5
4
6
7
1
2
Indicator Function
TRIP Distance travelled since the last RESET
TOTAL Total distance travelled (cannot be
changed)
RANGE Estimated range of the available battery
charge, calculated based on the most
recent manner of riding
Table 25: Information display
1
4
6
2
2
3
7
5
8
9