Setting up the Lancing Device
Our Lancing Device allows you to collect your capillary blood from your fingertip (and
alternative sites) easily and virtually pain free.
The Lancing Device offers you 6 depths of skin penetration:
The longer the length of the indicator line, the greater the depth of penetration.
Shallow
Deep
Average skin
Soft or thin skin
Thick or calloused skin
A Clear Cap
(For AST use only)
To reduce the chance of infection:
► Never share a lancet or the lancing device.
► Always use a new, sterile lancet. Lancets are for single use only.
► Avoid getting hand lotion, oils, dirt or debris in or on the lancets and the lancing
device.
► The used lancet may potentially be biohazardous. Please dispose of used lancets
properly.
WARNING
Ver 1.0 2017-08
318-5010200-092
LANCING DEVICE
Cap
Cocking
Control
Release
Button
Lancet Holder
Ejector
Arrow
Depth Indicator
Adjustable Tip
Lock Indicator
Lock
Hold your fingers on the
body NOT the cap.
1
2
3
2.
Insert a lancet into the lancet holder
and push down firmly until it is fully
secured.
3.
Twist the protective disk off the lancet.
4.
Replace and twist the cap to the right to
close the lock as shown in the picture until
you hear the click. When the lock is
properly closed lock indicator is in the
extreme right position.
5.
Hold the cap to select the depth of
penetration by turning the adjustable tip
in either direction so that the arrow on the
cap points to the desired depth.
6.
Pull the cocking control back until it
clicks. You will see a color change inside
the release button when it is ready.
► If it does not click
,
the device may
have been cocked when the lancet was
inserted.
1
2
1.
Twist and pull off the cap of the lancing
device.