UBS Hydro II
Maintenance
EN
2018-05-02
40 / 60
Guards (coverings)
Interval
When the machine is put into service, is switched on
Test scope
Visual inspection for integrity
Tester
Operating personnel
Measures to
be taken in
case errors
occurred
•
Cordon off the danger zone
Repair
Dead man lever
Interval
During operation of the one-axle carrier vehicle, in addition
once a year
Test scope
Operability
Tester
Operating personnel
Measures to
be taken in
case errors
occurred
•
Do not put into service
•
Switch off the engine and secure it against a restart
•
Initiate maintenance by trained specialist
7.3.2
Daily check
Personnel:
•
Private and commercial users
Protective equipment:
•
Protective clothing
•
Protective gloves
•
Safety goggles
The user shall plan, perform and record the tests considering the applicable
regulations and laws.
The safety devices must be ensured, in order to ensure a safe operation of the
machine:
Check the following items on the machine every day:
•
Before each use, check the safety elements and movable parts for wear and
tear.
•
Before each use, check the hydraulic oil level. For this purpose, unscrew the
tank filler cap and visually check if the oil in the tank slightly covers the
horizontally arranged metal sheet.
•
Before each starting up, check the engine oil level.
•
Check the primary air filter (if installed) and the air filter cartridge for pollution
and replace in case it is very dirty or damaged.
