UBS Hydro II
Operation
EN
2018-05-02
33 / 60
6.4
Steering
Fig. 9: Steering with single lever and optional double lever
1
Second steering lever left
2
Steering lever left
3
Dead man lever
4
Steering lever right
5
Second steering lever right
The steering unit is designed as follows:
•
The working machine is driven by two wheel motors that are controlled
separately.
•
Due to the individual wheel drive the wheels can be turned at different
speeds and in different directions. This makes it possible to drive narrow
curves and, if required, to stop the machine fast or to reverse.
•
As displayed in the figure, the control panel includes one handle each on the
steering levers (2 and 4). If it is a model with double levers, the optionally
available second steering levers (1 and 5) are installed.
•
If, for instance, a drive shall be started to the left, this can be done by
actuation of the left steering lever (2) on the left handle. The more the
steering lever is pulled through, the smaller the turning circle will be until,