Kersten KM 11545 H-ABR 45, Оригинальная инструкция по эксплуатации, Страница: 11 / 25

11
Montage - KM 11545; 13045; 15045 H-ARB/ M-ARB 45
7 Installation
7.1 Attachment of the front sweeper
Danger!
Severe injuries to the operator or third parties may occur.
Switch off the tractor and remove the ignition key before mounting or dismounting the mounted
sweeper.
Depending on the design of the front hydraulics, hook the sweeper into the tractor implement
triangle or the two-point mounting, whereby the connecting parts may have to be adjusted for the
sweeping machine to the desired lifting height for the first time.
For easier attachment and removal of the sweeper, we recommend the two additional side
parking supports with wheels (optional).
7.2 Cultivation of a KM 11545;13045; 15045 H-ARB/ M-ARB 45
Depending on the tractor type, the delivered PTO shaft may be too long. In this case, it must
be shortened according to the following steps.
Attention!
Damage to the attachment or to the tractor may occur. Use only the
supplied PTO shaft.
Note!
When installing the PTO shaft, also pay attention to the original
instructions supplied by the PTO shaft manufacturer.
Instructions for shortening and assembling the PTO shaft
Shortening the PTO shaft
1. Pull apart the cardan shaft halves.
2. Install one end of the PTO shaft on the tractor.
3. Attach the other end of the PTO shaft to the attachment.
Fig.1
Fig.2
4. In the shortest working position, mark the piece to be sawn on one
half of the PTO shaft. (Fig. 1)
5. Cut off the universal shaft guard to the mark. (Fig. 2)