9 Instant help
In case of an error in the program process, briefly turn off the appliance and
disconnect from power supply. The process must then be restarted from the
beginning.
Help:
Fault Possible
cause
Display is not lit up.
•
The display unit is not switched on.
•
The mains supply connection has
been interrupted (mains cable not
plugged in/faulty).
•
Power supply interrupted.
•
Batteries are inserted incorrectly or
empty
•
No batteries inserted.
The display only shows “ON“
•
Unit is not connected to balance
•
Incorrect definition for balance
interface
•
Electromagnetic fields / static charging
(choose different location/switch off
interfering device if possible)
YKD-BA-e-0710
12
