KERN TFCD 10K-3-A, Руководство пользователя

Страница: 22 / 30

22 TFCD_A-BA-e-2110
8.8 Test weighing
The function is available starting from weight values above 20 d .
Activating the test weighing mode:

In the weighing mode, press TARE , < > will be displayed.

Pressing TARE enables to switch between < > a < >.
< > function deactivated
< > function activated
8.8.1 Test weighing
The <Test weighing> application enables to determine the upper and lower limit
value and, consequently, to ensure the weight of the weighed material belongs to the
range between the determined tolerance limits.
Exceeding the limit values (fall below and rise above) is signaled with a visual
indication (tolerance symbols , , ) and an audible indication.
Setting conditions of sending and limits:
1. In the weighing mode, press and hold the ZERO , <
inside
> will be
displayed.
2. Using the ZERO button, select the required signaling condition.
You can choose:
inside
1. If the weighed portion is in the present limit range, a sound
is heard and a tolerance symbol OK is displayed.
2. If the weighed portion is below the lower limit value, the
sound is not heard and the tolerance symbol UNDER is
displayed.
3. If the weighed portion is above the upper limit value, the
sound is not heard and the tolerance symbol OVER is
displayed.
outside
1. If the weighed portion is in the present limit range, a sound
is not heard and a tolerance symbol OK is displayed.
2. If the weighed portion is below the lower limit value, the
sound is heard and the tolerance symbol UNDER is
displayed.
3. If the weighed portion is above the upper limit value, the
sound is heard and the tolerance symbol OVER is
displayed.