KERN OZC 583, Инструкция пользователя

Страница: 20 / 25

19 OZC-5-BA-e-1510
5.10 Using additional accessories
Angle table
Standard angle table Angle table for using transmitted light
For easier handling of an object to be observed, it can be useful to fit an additional
mechanical angle table on the working surface of a stereo microscope.
For devices without lighting you can use a standard angle table
(see left figure) .
However if there is an integrated transmitted lighting unit, you should use a special
angle table with transmitted light compatibility (
see right figure ).
As the figures show, both versions each have two coaxially positioned adjustment
wheels in the righthand rear corner of the table. This means that you can move it in
the x and y directions.
To fit this, the user must bore four holes through the surface of the stand base at
particular points on the edge of the recess for the stand inlay. Then the screws
included with the table can be used to fix the table from the underside.
A user guide is included with the delivery of each angle table which contains the
precise instructions on how to fit it. We strongly recommend that you follow these
instructions closely, to make sure that you will be able to use the angle table without
problems.