KERN OZC 583, Инструкция пользователя

Страница: 10 / 25

9 OZC-5-BA-e-1510
4
Assembly
The first step is to position the microscope stand on a firm, level surface . The term
stand covers the stand base (standing surface) as well as the metal pillar which is
connected to it.
The holder is connected to the post of the stand by a toothed rack.
Please see section 5.5 for more details on adjusting the stand.
The next step is to place the
microscope head on the holder , by passing the
objective through the holder ring until the rest of the head is above the ring.
You must use the small silver adjusting screw on the front of the holder ring to
fix the
head in place.
The alignment of the microscope head is left to the user to do and can be adjusted to
suit the individual application situations.
To make it easier to operate the focus wheels for example, we recommend that you
position the head with the tube connectors centrally to the front.
Ideally, the holder and head are then parallel on the central axis of the stand base
(see figure on page 10).
Then you can remove the protective caps from the tube connectors so that you can
then
fit the eyepieces . When doing this, please be particularly careful that you do
not touch the optical lenses with your fingers and that no dust enters the
apertures.
You should also
never fit two eyepieces with different magnifications .
You also have to make sure that the device is supplied with energy, when it is
intended to use the incident lighting. Therefore firstly you must connect the power
plug of the
control device for lighting to a power socket. Afterwards you can
establish the connection between the microscope head (lefthand side) and the
control device by using the appropriate connection cable .
Additional optional attachments:

The eye cups supplied with the microscopes can be fitted to the eyepieces.
(see section 5.6).

You can fit a C-mount adapter to the appropriate connection point on the top
of the microscope head. This enables you to fit and use digital cameras
(remove protective cap first)
(see section 5.9) .