KERN OBN 141, Инструкция пользователя

Страница: 30 / 43

29 OBN-14-BA-e-1510
Assembly
In order to assemble the fluorescence reflected light unit correctly and mount it
afterwards to the microscope housing, the following steps have to be carried out.
1. When the microscope is already assembled without the FL unit, you have to
remove the microscope head at first.
2. Tip the main body of the FL unit to the side and mount the protective plate to the
appropriate location on the underside.
3. Attach the main body to the therefore intended connection point of the
microscope housing and fix it with the screw.
4. Unite the lamp housing and the main body by their connection points and fix it
with both screws.
5. Attach the microscope head to the main body and fix it with the Allen screw.
6. Install the connecting cable between lamp housing and power supply unit.
7. Establish the power supply by attaching the mains cable.
Operation
Before you use the reflected light unit for special fluorescence applications, it will be
favourable to adjust the microscope in the bright field mode. This includes the placing
of the sample, adjusting the interpupillary distance, pre-focussing, dioptre
adjustment, etc. After that you can go on with the usage of the fluorescence reflected
light unit.
1. When using a HBO lamp at first there must be ensured, that the control lever for
the illumination is slid-in.
2. Establish the power supply. When using a HBO lamp, check the setting of the
input voltage by using the appropriate slide on the rear of the power supply unit
(100V/240V).
3. Press the main switch. When using a HBO lamp, you have to press the ignition
after that in order to illuminate the lamp. It lasts about 15 minutes until the lamp
has gained a maximum and stable illuminating power.
4. After placing the sample you can bring the needed objective into the beam path.
5. Choose the right position of the control wheel for the FL module.
6. When using a HBO lamp, now the control lever for the illumination can be pulled
out.
7. Start the observation.