KERN IFB-BA-e-1012 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 30

KERN IFB-BA-e-1012 Скачать руководство пользователя страница 14

Switch on instrument and press

during self-test.

Press

,

,

in turn and the first menu block “PO

CHK“ will appear.

Press

repeatedly until “P2 CAL“ appears.

Press

and the first menu item “COUNT“ will appear

At verified scales, press first the adjustment switch.

Press

repeatedly until “CAL“ appears.

Press

.

Wait for stability display, then press

. Ensure that there

are no objects on the weighing plate.

The currently set adjustment weight will be displayed.

Change by pressing the navigation keys (See chpt 2.1.1);

select desired setting; currently enabled digit will be flashing.

Acknowledge by

.

Carefully place adjusting weight in the centre of the weighing

plate. Wait for stability display, then press

.

After successful adjustment the appliance automatically

returns to weighing mode.

•

An adjusting error or incorrect adjusting weight will be indicated by the error
message, repeat adjustment procedure.

IFB-BA-e-1012

14

«
...
12
13
14
15
16
...
»

Содержание IFB-BA-e-1012































Отзывы:

Нет отзывов