2.
Balance display
Operation
Start balance by pressing
.
The balance will carry out a self-test.
Wait for „
0
“ display
(example)
Press
, "HOLD" will appear and a small
triangle flashes. During this time put samples to be
weighed in place.
The stability display will appear after a short time,
the triangle will stop flashing and the obtained
weight value is displayed.
By pressing
the balance returns to weighing
mode. The triangle disappears.
7.5 Backlight of the display (only "L" models)
The balance has the ability to turn the backlight of the display on or off.
For this purpose press
for approx. 3 sec.
FOB-N-BA-e-1410
19
