KERN EOB Series Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 20

KERN EOB Series Скачать руководство пользователя страница 19

EOB-B_EOE-B_EOS-B-SH-e-1911

- 19 -

Servicing, maintenance, disposal

Cleaning

Before cleaning, disconnect the appliance from the operating voltage.

Please do not use aggressive cleaning agents (solvents or similar agents), but a cloth
dampened with mild soap suds. Take care that the device is not penetrated by fluids and
polish it with a dry soft cloth.
Loose residue sample/powder can be removed carefully with a brush or manual vacuum
cleaner.

Spilled weighing goods must be removed immediately.

Servicing, maintenance

The appliance may only be opened by trained service technicians who are authorized by
KERN.
Before opening, disconnect from power supply.

Disposal

Disposal of packaging and appliance must be carried out by operator according to valid
national or regional law of the location where the appliance is used.

Error messages, troubleshooting guide

Error message

Function

hhhhhh

Overload

LLLLLL

Minimum weight under min. value

In case of an error in the program process, briefly turn off the balance and disconnect from
power supply. The weighing process must then be restarted from the beginning.
Help:

Fault

Possible cause



The balance is not switched on.

«
...
17
18
19
20
»

Содержание EOB Series





















Отзывы:

Нет отзывов