440-BA-e-1744
31
printout
Using this function data are selected which are to be sent via the
RS232C (
not
valid for data transfer mode BAPr ).
In weighing mode keep the
key pressed until
[Unit]
appears.
Press the
MODE
key several times until „
LAPr
“ is displayed.
Acknowledge using
SET
key, the current setting is displayed.
Select the desired output parameter by pressing the
MODE
key
Hdr
Edition of the headlines
GrS
Edition of the total weight
Net
Edition of the net weight
tAr
Edition of the tare weight
N7E
Edition of the stored weight
PCS
Edition of quantity
AUJ
Edition of the unit weight
Rqt
Edition of the reference quantity
FFd
Edition of a page feeding at start printer output
FFE
Edition of a page feeding at end printer output
After actuating the SET button, the current state is displayed ( on
/ off ).
Use MODE and PRINT key to change the status
„on
off“.
Use the SET key to confirm selection. The balance returns to
weighing mode.
By that way the user can configurate his own data block, which then
is sent to a printer or to a PC.
Baud rate
The baud rate defines the transfer speed vie the interface, 1 Baud =
1 Bit/second.
In weighing mode keep the
key pressed until
[Unit]
appears.
Press the
MODE
key several times until „
bAUd
“ is displayed.
Acknowledge using
SET
key, the current setting is displayed.
Use
MODE
key select the desired settings
9600
4800
2400
1200
19200
Use the
SET
key to confirm selection. The balance returns to
weighing mode.
Содержание 440-21A
Страница 75: ......
