Wirnet iBTS
Document title : Installation and
Maintenance Manual
Version : 2.0
Author : SNI
Date : 04/12/2018
Classification
This document is the strict property of Kerlink and shall not be either copied nor sent without express
written authorization of Kerlink
Internal Use
Kerlink m2m technologies reserved rights
Confidential
Kerlink – 1 rue Jacqueline Auriol – 35235 THORIGNÉ-FOUILLARD
Page 139 / 221
Strict confidential
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；
經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。
前項合法通信，指依電信規定作業之無線電信。
低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性
電機設備之干擾。
The Wirnet iBTS 923 is also compliant to:
PLMN01: GSM900 and DCS1800 Mobile Equipment Technical Specifications, rev 09-05-
2012
PLMN08: the Third Generation Mobile Telecommunication Terminal Equipment
Technical Specifications
CNS 13438: 2006 - Information technology equipment – Radio disturbance
Characteristics – limits and methods of measurement.
CNS 14336-1: 2010 - Information Technology Equipment – Safety – Part 1: General
requirements.
The LoRa frequency plan and channel allocation for Taiwan is defined in the LoRaWAN
specification and the regional parameters, as defined in [1] and [2], according to “AS
923MHz”.
2.3.9
Malaysia
The Wirnet iBTS 923 and Wirnet iBTS Compact 923 own a MCMC Type Approval with the
identification
number
RFFT/01A/1117/S(17-3593)
and
RFFT/02A/1117/S(17-3594)
respectively. The expiry date is 23/11/2022.
The following SLP certification mark is available on the external label:
No CID is available so far. It will be provided later on.
In Malaysia, the Wirnet iBTS 923 is considered as a Short Range Device (SRD) according to
“MCMC MTSFB TC T007: 2014, 1st Rev”.
The Wirnet iBTS 923 uses the 919-924MHz band with a maximum 500mW EIRP, according to
“CLASS ASSIGNMENT NO. 1 OF 2017”.
Item
Specification
Frequency range
919-923MHz
923-924MHz (1% duty cycle)
Max EIRP
0.5W
Max conducted power with 3dBi antenna
250mW (24dBm)
Max conducted power with 6dBi antenna
125mW (21dBm)
