Alarm Relay Board
Installation Guide
Page 3 of 3
P/N: 01513-001 Rev. A
NXT Tamper Connection
•
allows the NXT controller to record an Enclosure Tamper event
•
requires two-conductor, AWG 22 wire
4.0
Unit Operation
The ARB is operational as long as power is supplied to the unit. Two LEDs on the ARB provide unit
status.
•
Red LED – indicates alarm condition
•
Green LED – indicates non-alarm condition
Verify tamper switch operation by toggling the tamper switch(es) and observing the red and green
LEDs follow tamper switch state.
Contact Keri Systems:
End of document.
Keri USA
Keri UK, Ireland, Europe
2305 Bering Drive
San Jose, CA 95131
Unit 17
Park Farm Industrial Estate
Ermine Street
Buntingford
Herts SG9 9AZ UK
Telephone:
(800) 260-5265
(408) 435-8400
Telephone:
+44 (0) 1763 273 243
Fax:
(408) 435-7163
Fax:
+ 44 (0) 1763 274 106
Web:
www.kerisys.com
Web:
www.kerisystems.co.uk
E-mail:
[email protected]
[email protected]
E-mail:
