Kerio Tech KERIO WINROUTE FIREWALL 6, Руководство администратора

Страница: 337 / 368

24.2 Usage of the SSL-VPN interface
337
Allowing access from the Internet
Access to the SSL-VPN interface from the Internet must be allowed by defining a traffic rule
allowing connection to the firewall’s HTTPS service. For details, see chapter 7.4 .
Figure 24.3 Traffic rule allowing connection to the SSL-VPN interface
Note: If the port for SSL-VPN interface is changed, it is also necessary to modify the Service
item in this rule!
Antivirus control
If at least one antivirus is enabled in WinRoute (see chapter 13 ), all files transferred by the
SSL-VPN interface can be scanned for viruses.
In default configuration, only files uploaded to hosts in remote private networks are scanned.
For connection speed reasons, files downloaded to local hosts from remote networks are not
scanned by antiviruses (files downloaded from private networks are considered as trustwor-
thy). Settings of antivirus check can be changed in antivirus configuration — see chapter 13.5 .
24.2 Usage of the SSL-VPN interface
For access to the interface, most of common graphical web browsers can be used (however, we
recommend to use Internet Explorer version 6.0 or Firefox/SeaMonkey with the core version 1.3
and later). Specify URL in the browser in the
https://server/
format, where server represents the DNS name or IP address of the WinRoute host. If SSL-VPN
uses another port than the default port for HTTPS (
443
), it is necessary to specify the used
port in the URL, e.g.
https://server:12345/
Upon a connection to the server, the SSL-VPN interface’s welcome page is displayed localized
to the language set in the browser. If the language defined as preferred is not available, the
English version will be used.