Kerio Tech KERIO WINROUTE FIREWALL 6, Руководство администратора

Страница: 243 / 368

19.4 Alerts
243
•
IP address — public IP address of the host which the client connects from (see the
Hostname column above).
• Client status — connecting , authenticating ( WinRoute verifies username and password),
authenticated (username and password correct, client configuration in progress), con-
nected (the configuration has been completed, the client can now communicate with
hosts within the local network).
Note: Disconnected clients are removed from the list automatically.
19.4 Alerts
WinRoute enables automatic sending of messages informing the administrator about impor-
tant events. This makes WinRoute administration more comfortable, since it is not necessary
to connect to the firewall via the Administration Console too frequently to view all status in-
formation and logs (however, this does not mean that it is not worthy to do this occasionally).
WinRoute generates alert messages upon detection of any specific event for which alerts are
preset. All alert messages are recorded into the Alert log (see chapter 22.3 ). The WinRoute
administrator can specify which alerts will be sent to whom, as well as a format of the alerts.
Sent alerts can be viewed in Status
→
Alerts .
Note: SMTP relay must be set in WinRoute (see chapter 18.3 ), otherwise alerting will not work.
Alerts Settings
Alerts settings can be configured in the Alerts settings tab under Configuration
→
Accounting .
Figure 19.11 WinRoute Alerts
This tab provides list of “rules” for alert sending. Use checking boxes to enable/disable indi-
vidual rules.
Use the Add or the Edit button to (re)define an alert rule.