28
PERIODICAL MAINTENANCE
Maintenance foreseen:
All maintenance operations on the machine must be effected with the power supply switch turned off.
The machine must not be cleaned inside with jets of water which would compromise the electric components, but
using compressed air and brushes.
The machine body must be cleaned each month, removing any residue, and the bearings must be greased using a
normal lubricant commonly on sale.
Oiling:
Spare parts:
ref.no.
Description
unit
Roller for Swing
piece
Roller for Classic
piece
Roller for Twin oben
piece
Roller for Twin unten
piece
REDUCTION GEAR MRS FO/FO 1:28
piece
ELECTRONIC BOARD SL49 110 VOLT 50/60 HZ MONOPHASE
piece
ELECTRONIC BOARD SL49 110 VOLT 50/60 HZ MONOPHASE
piece
Motion sensor
piece
MOTOR 230 VOLT 50 HZ 0.37 KW
piece
MOTOR 230 VOLT 60 HZ 0.37 KW – UL/CSA
piece
MOTOR 110 VOLT 50 HZ 0.37 KW – UL/CSA
piece
MOTOR 110 VOLT 50 HZ 0.37 KW – UL/CSA
piece
LIMIT SWITCH PIZZATO
piece
FAULTS AND FAILURES:
In the case of malfunctions, consult the last chapter of this manual “FAULTS TREE”
RESIDUAL RISKS:
Risks for persons:
The safety of persons and things can be compromised if, when the machine is running:
• Covers provided for moving parts are opened.
• Safety systems are removed.
• Any damage to the control system is not repaired immediately.
• The electronic board is modified by unauthorised staff.
• The machine is started, for a test or demonstration, before being accurately fastened to the support structure.
Care must also be taken to prevent risks to persons and things as summarised below:
