KEPCO BOP 500M, Руководство оператора

Страница: 16 / 48

1-4
BOPHV020411
E) DYNAMICS: The dynamic response of the BOP output are tabulated in Table 1-3 in both the
time domain (Output response to a step program) and in the frequency domain (bandwidth)
for large and small signals.
1.5 MISCELLANEOUS FEATURES
A) OUTPUT RANGE: The BOP can be locally (front panel) adjusted, or remotely programmed,
from (-) 100% to (+)100% of its specified d-c voltage and current range. The Class A bipolar
output stage permits operation as either a SOURCE OR A SINK. (See FIG. 1-2.)
NOTE: Operation in the second quadrant of the graph must be derated as indicated.
TABLE 1-3. DYNAMIC SPECIFICATIONS
DYNAMIC SPECIFICATIONS
VOLTAGE CHANNEL CURRENT CHANNEL
BOP 500M BOP 1000M BOP 500M BOP 1000M
Closed Loop Gain 50 V/V 100 V/V 8 mA/V 4 mA/V
Bandwidth [d-c to f-3 dB] 5.3 KHz 1.8 KHz 2.0 KHz 1.5 KHz
Programming Time Constant
30
µ
sec. 88
µ
sec. 80
µ
sec 106
µ
sec.
Large Signal Frequency Response 6 KHz 1.9 KHz 2.5 KHz 1.6 KHz
Slewing Rate
18V/
µ
sec. 12V/
µ
sec. 1.25 mA/
µ
sec 0.4 mA/
µ
sec.
Load Recovery Time Constant
25
µ
sec. 75
µ
sec. 25
µ
sec. 50
µ
sec.
FIGURE 1-2. BOP OUTPUT CHARACTERISTIC