Cooking Timer
You can use the timer function to set a cook
time for any burner. The burner will lower to
power level 1 once the set time has elapsed.
The timer can be set for periods of up to 1
hour 59 minutes.
Activate the Cooking Timer
by first
selecting the desired cooking zone and power
level. Touch the clock graphic and then set
the desired time duration by touching the +
or - buttons, holding the button to increase or
decrease the setting. A beep will sound at the
start of the setting and the set time will display
in the timer display box. The time increments
will run from 1-10 minutes in 1 minute
increments, and then change to 5 minute
increments up to the next full hour, from there
on, it’s in increments of 10 minutes. The time
reading will speed up as the touch is held. The
timer automatically starts a few seconds after
you adjust the time. A clock will appear next
to the power level in the burner control area
indicating the timer has been set.
Cancel the Cooking Timer
by pressing the
clock graphic, then dial down to zero.
Change the Cooking Timer
by pressing the
clock graphic then the + or – buttons to adjust
to the desired time.
Operation
17
Cancel the Cooking Timer
by pressing the
clock graphic, then dial down to zero.
Change the Cooking Timer
by pressing the
clock graphic then the + or – buttons to adjust
to the desired time.
NOTE: All three timers are viewed and
controlled by the
Timer Display
and
Clock
graphic. Press the Clock graphic to advance
through each set timer. A clock indicator will
display in the Burner Control Area next to the
power level for each burner. When the clock
indicator light appears between the + or -
buttons the Kitchen Timer is being controlled.
SilKEN
®
Mat
The Bridge Induction cooktop incorporates a
high temperature silicone mat. The patented
SilKEN
®
mat covers the entire cooktop and
provides spill retention, glass top protection,
quikc heat dissipation and easy cleanup.
Simply throw the mat in the dishwasher or
sink.
