CLOSING THE GLASS LID
If your Kenyon Custom Cooktop is equipped with a glass lid, care should be followed when
lowering the lid onto the stove.
NEVER CLOSE THE LID ON AN OPEN FLAME OR AN
ELECTRIC ELEMENT THAT IS HOT OR TURNED “ON”
. Make sure that the appliance is cool
before lowering the glass lid onto the frame.
When the lid is in an open position, the “lid-stay” arm that is attached to the glass “locks” onto
the large lock screw. In order to lower the glass lid onto the stove frame, the “lid-stay” must be
unlocked from the mounting screw.
DO NOT TRY TO LOWER THE LID WITH THE “LID-STAY”
IN THE LOCK POSITION. FAILURE TO UNLOCK THE “LID-STAY” WHEN ATTEMPTING TO
LOWER THE GLASS LID CAN CAUSE DAMAGE TO THE APPLIANCE WHICH IS NOT
COVERED UNDER WARRANTY
.
12
USING THE ADJUSTABLE POT HOLDERS
To deploy: Loosen the two knurled nuts and swing the pot holders down to the horizontal. Slide
to fit pot snugly, tighten knurled nuts securely.
To Stow:
Wait until cool
, reverse above. Carefully, align the pot holders with their respective
notches in the black hinge before swinging up -
DO NOT FORCE!
CAUTION: Pot holders and lidstay get extremely hot during use.
Allow to cool to the touch before readjusting or stowing pot holders
or closing glass lid.
!
"LID-STAY"
LOCK SCREW
Gently lift "LID-STAY" up as shown
to disengage "LID-STAY" from lock position.
Carefully lower the glass lid once "LID-STAY"
is desengaged from the lock position.
To disengage lid from the
lock position, fully extend
(rotate lid back) lid back
and gently lift
“lid-stay” up as shown
to disengage from the
lock position. Once the
“lid-stay” is in the unlock
position, the lid can be
lowered to the close
position.
Pot Holders
Deployed
Pot Holders
Stowed
Gently lift “lid-stay” up as
shown to disengage
“lid-stay” from lock
position. Carefully lower
the glass lid once
“lid-stay” is disengaged
from the lock position.
