12
To see the time display :
Press the CLOCK button.
•
The time display will appear for about 5 seconds.
Note :
• The clock display will flash on and off at the push
of the CLOCK button when the AC power sup-
ply is restored after a power failure occurs or
after the AC power cord is disconnected. If this
happens, follow the procedure below to change
the clock time.
To change the clock time :
1 Press the CLOCK button.
2 Within 5 seconds, press the MEMORY/SET but-
ton.
3 Perform steps
6
-
9
on page 11 .
To change the time display mode :
1 Perform steps
1
-
2
in the section “RESET-
TING THE MICROCOMPUTER”, on page 37.
2 Perform step
1
-
9
on page 11.