Kenwood TS-990S, Инструкция по эксплуатации

Страница: 114 / 290

5-36
5 ASSISTING YOUR SMOOTH QSO
Index Contents
SELECTING MAIN BAND AND SUB BAND FOR
RECEPTION (FSK)
You can select decoding either on the main band or on the
sub band.
[F1]~[F7]
[FSK/PSK/REV]
1 Press [FSK/ PSK/ REV] to enter RTTY (FSK) mode.
2 Press [DECODER] (F3) to open the RTTY Encode/
Decode screen.
3 Press [M/S] (F2) to select either main band or sub
band.
Note:
◆ If the selected decoding object falls under either one of the
following conditions, "RX: Reselect FSK" appears in the RTTY
Encode/Decode screen.
A mode other than RTTY (FSK) is selected.
The receive capability for the sub band is disabled when the sub
band is selected.
◆ If the transceiver is in any mode other than RTTY (FSK) mode,
"TX: Reselect FSK" appears in the RTTY Encode/Decode screen.
Press [FSK/PSK/REV].
SAVING THE CONTENTS OF RTTY
COMMUNICATION
You can save the contents of the communication
displayed in the RTTY Encode/Decode screen in a USB
flash drive.
[F1]~[F7]
[FSK/PSK/REV] [ESC]
1 Press [FSK/ PSK/ REV] to enter RTTY (FSK) mode.
2 Press [DECODER] (F3) to open the RTTY Encode/
Decode screen.
3 Insert a USB flash drive into the (USB-A)
connector.
Use a USB flash drive which was formatted by the
transceiver.
4 Press [SAVE] (F4) to store the contents of QSO.
A message notifying you of the completion of the data saving
appears.
If [SAVE] (F4) is unavailable in the function key guide, press
[MORE] (F1). An alternate key guide will appear.
5 Press [OK] (F4) to end.
Note:
◆ The file name is given using the numbers and underscores
representing the time and date, and the extension selected in
Menu 2-12, "RTTY/PSK Log File Format", is also added. The data
is displayed in the order of the year, underscore, hour, minute, and
second.
Example:
Example: In the case of 10:20:30, February 15, 2013:
20130215_102030.txt
◆ A file be saved in the following folder.
KENWOOD/TS-990/DECODE/FSK
◆ Remove the USB flash drive only after Safe Removal of USB Flash
Drive is executed. {page 12-1}