Kenwood TS-890S Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 96

background image

2

01 prologue

As described above, TS-890S has been developed to inherit the DNA of KENWOOD’s HF transceivers and as a model

that forms the core of the TS-x90 series. It is an advanced transceiver for practical use that has evolved in its own ways

as a full-fledged successor of the TS-800 family, and not just a modified version of the TS-990S or TS-590 models.
This in-depth manual is written by the TS-890S designers to describe the technologies and techniques used to achieve

the performance and features mentioned above. We hope it will help you gain an in-depth understanding of the TS-890S.

Features of the TS‑890S

• Advanced-level transceiver designed for practical use that surpasses the basic reception performance of models in the same

class, boasts diverse features and inherits the texture of the TS-990S

• Adopts a 7-inch TFT color display and offers various information for an enhanced experience in the integrated management of

operations: Auto Scroll mode, filter scope, TX digital meter, etc.

• Top-class basic reception performance - covers all frequency bands with the down-conversion system Comes equipped with 15

kHz, 6 kHz, 2.7 kHz and 500 Hz roofing filters (270 Hz roofing filter is available as an optional item)

•  HF band, +50 MHz band, +70 MHz (European model only)
•  100 W heavy-duty output (50 W/70 MHz for European model)
•  Built-in auto antenna tuner (relay system, high-speed matching)
•  SSB, CW, FSK (RTTY), PSK31 (BPSK/QPSK), PSK63 (BPSK), AM, FM
•  Enables decode/encode in FSK, PSK31/63 as well as CW mode
•  Two 32-bit floating-point DSPs for transmission/reception and scope display
•  Equipped with LAN, USB and COM ports
•  Supports external connections (DVI-I terminal)
•  Supports remote control operation that does not require the use of a host PC (direct IP connection) Radio control program (ARCP-

890) and radio host program (ARHP-890) are supplied as free software as with previous models

• Supports USB audio PC speakers and microphone can be used for operation by employing the USB Audio Controller (ARUA-10)

free software

• SP-890 (external speaker) and YG-82CN-1 (270 Hz CW filter) are available as optional items

«
...
4
5
6
7
8
...
»

Содержание TS-890S

































































































Отзывы:

Нет отзывов

Похожие инструкции для TS-890S

Бренд: 3onedata Страницы: 3

Бренд: Ubee Страницы: 7

Бренд: Nokia Страницы: 107

SecPath M9000-AI-E16

Бренд: H3C Страницы: 128

Бренд: TRI02SYS Страницы: 4

Бренд: schmalenberger Страницы: 28

Бренд: Wildix Страницы: 5

Бренд: Wildix Страницы: 15

Бренд: Ness Страницы: 4

PathBuilder S200 Series

Бренд: 3Com Страницы: 162

Бренд: Black Box Страницы: 9

Бренд: Black Box Страницы: 32

Бренд: HOOC Страницы: 2

Бренд: Redlion Страницы: 8

Бренд: Watts Страницы: 140

Бренд: URC Страницы: 16

Бренд: Viola Systems Страницы: 40

EAC Mini IL20EAC-N

Бренд: Winmate Страницы: 82

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды