MODELS COVERED BY THIS MANUAL
The models listed below are covered by this manual.
TH-F6A:
144/ 220/ 440 MHz FM Tri-band
Portable Transceiver
TH-F7E:
144/ 430 MHz FM Dual-band
Portable Transceiver
MARKET CODES
K-type:
The Americas
E-type:
Europe/ General
T-type:
The United Kingdom
The market code is shown on the carton box.
Refer to the specifications {pages 53, 54} for the
information on available operating frequencies within
each model.
NOTICE TO THE USER
One or more of the following statements may be
applicable for this equipment.
FCC WARNING
This equipment generates or uses radio frequency energy.
Changes or modifications to this equipment may cause harmful
interference unless the modifications are expressly approved in
the instruction manual. The user could lose the authority to
operate this equipment if an unauthorized change or
modification is made.
INFORMATION TO THE DIGITAL DEVICE USER REQUIRED
BY THE FCC
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation.
This equipment generates, uses and can generate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that the
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment to an outlet on a circuit different from
that to which the receiver is connected.
•
Consult the dealer for technical assistance.
PRECAUTIONS
Please observe the following precautions to prevent
fire, personal injury, or transceiver damage:
•
Do not transmit with high output power for
extended periods. The transceiver may overheat.
•
Do not modify this transceiver unless instructed by
this manual or by KENWOOD documentation.
•
When using a regulated power supply, connect the
specified DC cable (option) to the DC IN jack on
the transceiver. The supply voltage must be
between 12 V and 16 V to prevent damaging the
transceiver.
•
When connecting the transceiver to a cigarette
lighter socket in a vehicle, use the specified
cigarette lighter cable (option).
•
Do not expose the transceiver to long periods of
direct sunlight nor place the transceiver close to
heating appliances.
•
Do not place the transceiver in excessively dusty
areas, humid areas, wet areas, nor on unstable
surfaces.
•
If an abnormal odor or smoke is detected coming
from the transceiver, turn OFF the power
immediately and remove the battery case or the
battery pack from the transceiver. Contact your
authorized KENWOOD dealer, customer service,
or service station.
Содержание TH-F6A
Страница 64: ......
