RXD-NV500/NV600
2
2
CONTENTS / ACCESSORIES / CAUTIONS
CONTENTS / ACCESSORIES / CAUTIONS ............. 2
CONTROLS ................................................................3
DISASSEMBLY FOR REPAIR....................................4
BLOCK DIAGRAM ......................................................5
CIRCUIT DESCRIPTION ............................................6
ADJUSTMENT ..........................................................11
WIRING DIAGRAM ...................................................12
PC BOARD .............................................................. 13
SCHEMATIC DIAGRAM .......................................... 19
EXPLODED VIEW ....................................................33
PARTS LIST..............................................................35
SPECIFICATIONS ....................................................44
Contents
FM indoor antenna (1)
(T90-0836-05)
Loop antenna (1)
(T90-0837-05)
Remote control unit (1)**
(A70-)
Batteries (R6/AA) (6)
*AC plug adaptor (1)
(E03-0115-05)
* Use to adapt the plug on the power
cord to the shape of the wall outlet.
(Accessory only for regions where
use is necessary.)
** Refer to part list.
System configuration
SYSTEM
RECEIVER
SPEAKER
NV-500
RXD-NV500
LS-NV500
NV-600
RXD-NV600
LS-NV600S
Operation to reset
The microcomputer may fall into malfunction (impos-
sibility to operate, erroneous display, etc.) when the
power cord is unplugged while unit is ON or due to
an external factor. In this case, execute the following
procedure to reset the microcomputer and return it
to normal condition.
Unplug the power cord from the power outlet then,
while holding the CD Open close (
0
) key de-
pressed, plug the power cord again.
After some time, the power will be switched off and
return will be made to the initial status.
÷
Please note that resetting the microcomputer clears the
contents stored in and it returns to condition when it left
the factory.
Note related to transportation and movement
Before transporting or moving this unit, carry out the
following operations.
1
Select the CD input
2
Press the
0
key and take out the CD.
3
Ensure that "No Disc" is displayed.
4
Wait for a few seconds, then set the power
OFF.
CD
6
TUNER
/BAND
0
Cautions
Accessories