Kenwood ProTalk NX-P500, Руководство пользователя

Страница: 25 / 68

25
FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION
FleetSync is an Alphanumeric 2-way Paging Function, and is a protocol owned by
JVC KENWOOD Corporation.
Note:
◆
This function is available only in analog operation.
SELCALL MODE (SELECTIVE CALLING)
A Selcall is a voice call to a particular station or group of stations.
Each transceiver is set up with an individual ID number for use with Selcalls.
There are several types of Selcalls available: Individual, Group, and Broadcast.
• Individual Calls are calls made to individual parties.
• Group Calls are calls made to all parties within a group.
• Broadcast Calls are calls made to all parties in all groups.
The default status of the transceiver does not allow you to make a Selcall.
Use the following procedures to set up your transceiver to allow Selcalls:
Step 1: Activate the FleetSync Optional Signaling
1
Enter the Setting mode {p.37}.
2
Press the or button to select “ ”.
3
Press the Menu button then press the or button to select your desired
value.
OFF The Selcall function by FleetSync is deactivate.
FleetSync The Selcall function by FleetSync is activate
• After setting the Optional Signaling to FleetSync, you will no longer be able
to receive calls except selcalls.
Step 2: Set up your own ID (ID List Setting mode for Selcall)
1
With the transceiver power OFF, press and hold while
turning the transceiver power ON.
• A beep will sound and the transceiver will enter ID List Setting mode.
• It can not be set unless editing in ID List Setting mode is permitted on the
FPU.
2
Press the or button to select a List ID number.
List ID number