manualshive.com logo in svg

Kenwood ProTalk DIGITAL TK-3701D, Руководство пользователя, Страница: 8 / 31

Поделиться
Скачать
Kenwood ProTalk DIGITAL TK-3701D Скачать руководство пользователя страница 8

8

BASIC OPERATION

POWER ON

Turn the Power switch/ Volume control clockwise to switch the 

transceiver power ON.

• 

Beep A (1 beep) will sounds.

ADJUST THE VOLUME

Rotate the Power switch/ Volume control to adjust the volume.

• 

Clockwise increases the volume and counterclockwise decreases the volume.

Note:  

 

◆

To adjust the volume using background noise as a reference in Analogue mode, use the 

[Monitor] or [Squelch Off] (Side 2 button default) function.

SELECT A ZONE

Press and hold the Side 1 button for 1 second to change Zone 1, 

Zone 2, and Zone 3.

• 

Side 1 button is the default setting.

SELECT A CHANNEL

Rotate the Selector to select your desired channel.

MAKE A CALL

Press and hold the PTT switch, then speak into the microphone 

using your normal speaking voice.

• 

Hold the microphone approximately 3 to 4 cm (1.5 inches) from 

your mouth.

Release the PTT switch to receive.

Note:  

 

◆

When the battery pack voltage becomes too low, transmission will stop and an alert 

tone will sound.

Содержание ProTalk DIGITAL TK-3701D
































Отзывы:

Нет отзывов