Kenwood ProTalk DIGITAL TK-3701D, Руководство пользователя, Страница: 26 / 31

26
SECOND PTT FUNCTION
Apart from the channel you normally select, you can use another channel (second
channel) with a dedicated [Second PTT].
• Second PTT function can be activated by your dealer.
SECOND PTT OPERATION
Second Channel Scan
“Scan Type” is set to “Second Channel”, it alternately scans the second channel
with the channel you normally select.
• Second Channel Scan cannot be used with Priority Scan.
Transmitting
1
Press the button programmed as [Second PTT] to move to second channel.
2
After moving to second channel, press and hold the button programmed as
[Second PTT] to start transmission.
• When transmitting with Second Channel, Second Channel Tone will sound if
“Second Channel Tone” is enabled.
• If “Second PTT Transmit Time” is set (
“
1
” second
or
“
Immediate
”
),
transmission starts when that time elapses.
3
Release the button programmed as [Second PTT], return to previous normal
selected channel.
• If “Second Channel Hold Time” is set (
“
1
” ~ “10” seconds
or
“
Immediate
”
),
the second channel is held until that time elapses.
Receiving
1
When receiving the second channel, Second Channel Tone will sound if
“Second Channel Tone” is enabled.
2
Press the button programmed as [Second PTT] to move to second channel.
• Subsequent operations are the same as “Transmitting”.
Note:
◆
It is recommended to set different QT/DQT (Analogue) or Common ID (Digital) for the
normal selected channel and the second channel respectively.