Kenwood ProTalk DIGITAL TK-3701D, Руководство пользователя, Страница: 14 / 31

14
FREQUENCY SETUP
1
During Setup Mode Selection, rotate the Selector to select a channel number.
• The transceiver announces the zone number and channel number.
2
Press the PTT switch to set the channel number.
3
Press the Side 1 or Side 2 button to select the Frequency Setup Mode.
• The transceiver announces “Channel”.
4
Press the PTT switch to enter Frequency Setup Mode.
5
Press the Side 1 or Side 2 button to increment/ decrement the frequency table
number, to select the new channel frequency.
• Voice announcement: “Analogue Table X” (X = 1 to 16 for Analogue
Frequency).
• Voice announcement: “Digital Table X” (X = 1 to 32 for Digital Frequency).
• Table numbers and their corresponding operating frequencies are provided
in the table {p. 15}.
• A voice announcement will inform you of the currently selected frequency
table number.
6
Press the PTT switch to temporary save the selected frequency table number.
• Beep B (2 beeps) will sound.
• Repeat steps 1 to 6 to set up another channel.
7
Press the Side 1 or Side 2 button to select the Confirmation Setup Mode.
• The transceiver announces “Confirm”.
8
Press the PTT switch to save the setting and return to zone selection.
• Beep B (2 beeps) will sound.
Note:
◆
The transceiver will automatically return to normal operation if no action is performed for
20 seconds.